LUCID 2-CH 10G/1G RDMA PoE+ Host Channel Adapter (HCA) Network Card
LUCID’s PCIE-10GPOE2-LUCID HCA network card is a dual-port 10GBASE-T, PoE+, PCIe 3.0 x8 Host Channel Adapter (HCA) that supports RDMA (RoCEv2), UDP, and TCP 10GigE data transfers with the Atlas10 – 10GigE camera. This network card is fully compliant with the IEEE 802.3an standard and uses the Broadcom BCM57416 Ethernet controller with the integrated dual-channel 10GBASE-T transceiver. This card supports PoE+ (IEEE 802.3at) with Molex 4-pin / SATA 15-pin connectors. Important: This RDMA HCA is not NBASE-T compatible and does NOT support 5GigE or 2.5GigE speeds.
Specifications
Manufacturer #: | Ports: |
LUCID PCIE-10GPOE2-LUCID | 2 x PoE+ 10GBASE-T IEEE 802.3an / 1000BASE-T IEEE 802.3ab |
Other specifications and features: | |
• x8 PCI Express v3.0 compliant • RDMA over Converged Ethernet (RoCEv2) • SR-IOV with up to 128 VFs • Function Level Reset (FLR) support • TruFlow™ flow processing engine • Virtual Network Termination–VXLAN, NVGRE, Geneve, GRE encap/decap • vSwitch acceleration • Tunnel-aware stateless offloads • DCB support: PFC, ETS, QCN, DCBx • SMBus 2.0 • MCTP over SMBus • PCIe-based UART and KCS • Jumbo frames up to 9 KB • Advanced Congestion Avoidance |
•Multiqueue, NetQueue, and VMQ • IPv4 and IPv6 offloads • TCP, UDP, and IP checksum offloads • Large Send Offload (LSO) • Large Receive Offload (LRO) • TCP Segmentation Offload (TSO) • Receive-side Scaling (RSS) • Transmit-side Scaling (TSS) • VLAN insertion/removal • Interrupt coalescing • Network boot-PXE, UEFI • iSCSI boot • MSI and MSI-X • Conforms to the PCI Express Card Electromechanical Specification Rev. 3.0 |
Power Input for POE+ (IEEE 802.3at) | |
Step-Up 12V from the following source (A or B): A. From PCIe Slot (25 W or 75 W depends on mainboard design), B. From IDE Big 4 pin Power Connector or/and SATA 15pin Power Connector. | |
Package includes: | |
1 x 2 Port LUCID 10GigE RDMA PoE+ HCA, 1 x low profile bracket |
USD $400.00
Register or login for pricing